New Power Feed Table Fits Bridgeport Acer Mills Z Axis 150LBS Power Feeder R]

Description

SHARS New Power Table Feed Fits Bridgeport Acer Mills Z Axis 150LBS
Product Code
202-2214
Product description
Power Feed w/mounting brackets
Fits Bridgeport Series I, Brute (9x42, 9x49 table), Jet (1048 VS), Select (1VB(5/8 .625 Dia. lead screw )), South Bend (Import)
Z traverse (Knee Travel)
Torque: 150in-lb peak / 119in-lb continuous
Feed rate: 0.4 to 37.4 IPM
Speed: 0-210 RPM
Horsepower: 1-3HP
For 5/8" shaft with keyway
Shars Model#: APZ150
Product application
For mounting on manual mill that has a 5/8 shaft with keyway, mounting adapter (shown below) included
Product features
Shars APZ150 power feed uses a full wave Compound DC Motor which takes advantage of both Shunt-wound DC motor (high initial starting torque) and Series-wound DC motor (constant ratio between speed and torque) technology to generate stable feed rates resulting in minimized cutting vibrations, a smoother finish on the work piece, an even, low speed, and longer cutting tool life.  The other import brand power feeds use Series-wound DC motors for their simple design structure and low cost.
Shars APZ150 power feed uses a Compound DC motor which is more stable while in high speed cutting environments and results in better cutting tool life and surface finish on work piece.
Other import brand's power feeds use series DC motors which lose torque as speed increases, generating excessive vibration and poor cutting tool life.
When the enameled copper wire of the compound stator (Series winding + Shunt winding) is in operation, the series + shunt stator has an instant complementary function of high initial torque and constant speed control.
Shars power feeds use a compound stator of 0.6mm of 45 turns for Series winding and 0.13mm of 1,800 turns for Shunt winding.
Other import brand's power feed use series stator (0.6mm of 150 turns for series winding) to get high starting torque but has no continuous torque. So, the torque and speed will drop rapidly while loading. It is easy to cause vibration and cutter damage
APZ150 power feed's rotors use a heat-resistant enameled copper wire with dynamic balancing; special designed cooling fan; aluminum alloy bearing holder. The rotor is durable and not easy to overheat and deform
The main circuit board is well protected by a series of safety designs. The automatic correction function would be activated when input voltage is unstable. It is easy to maintain when the problem is caused by an external factor.
The rapid speed button is combined with the direction switch to be more intuitive for the user. The control panel also provides a jog switch to make incremental movements; length adjustable determined by speed control setting.  The control panel's fluid protective lip helps minimize coolant damage to all front control switches
The limit switch eliminates over travel due to the inertia of the motor when contacting limit stops or loss of power.The limit switch also has a protective cover
to be dust-proof, water-proof and fluid-proof
The patented Electromagnetic clutch enables users to reverse direction quickly without the plastic gear being broken by the motor shaft gear, because the clutch is attracted and repelled within 0.4 second. At the same speed, the origin repeatability of the power feed is within 0.05mm
Shars APZ150 Power Feed Clutch
Other import brand's power feed use a traditional clutch. The traditional clutch is known for high inertia and braking too slowly while changing directions which always results in plastic gear damage
The gear ratio between the transmission plastic gear and the motor shaft gear is an infinite decimal, so that the two gear will not return to their original teeth position turn after turn, improving gear service life
Remarks: The plastic gear has 107 teeth, motor shaft gear has 6 teeth
107÷6=17.83333...
With other import brands, the gear ratio between transmission plastic gear and motor shaft gear is a limited decimal. When fabricated this way, these two gears will return to origin after 21.4 turns which causes periodic wear and tear and shortens the transmission plastic gear’s service life.
Remarks: The plastic gear 107T, motor shaft gear 5T
107÷5=21.4
Helical spiral bevel gear to transmit movement to lead screw, it provides the smoothest, quietest operation available
Product includes
Mounting hardware
Power Feed
Instruction manual
We have other power feeds available at
My Ebay Store
Related products
Product Code:
202-2203
USD$
15.00
Milling Machine Power Feed Nylon Gear
Installation instructions and drawings
NOTE:
Shars Products Company has made every effort to provide mounting hardware kits that are as accurate and complete as possible for each machine model. However, machine builders may change their designs without letting us know. Therefore, some kits may not fit properly. Please let us know when this happens.
Machine
Table Feed
Cross Feed
Knee Feed
GENERAL PURPOSE
(If your mill model is not listed below, you can use this. Also use this for custom machine applications.)
202-2211
202-2212
202-2213
202-2214
BRIDGEPORT SERIES I
202-2211
202-2212
202-2213
202-2214
BRIDGEPORT SERIES I
202-2211
202-2212
202-2213
202-2214
COMET 9 x 42
202-2211
202-2212
202-2213
202-2214
JET 1048 VS
202-2211
202-2212
202-2213
202-2214
MILLPORT 2S, 3V, 3VH, K MILL
202-2211
202-2212
202-2213
202-2214
SELECT 1VBVS, 1VB (.625 dia lead screw)
202-2211
202-2212
202-2213
202-2214
SOUTH BEND IMPORT
202-2211
202-2212
202-2213
202-2214
SOUTH BEND 2 HP
202-2211
202-2212
202-2213
202-2214
WEBB CHAMP 1-1/2 (before Jan '91)
202-2211
202-2212
202-2213
202-2214
All Available to Ship NOW! at Fixed Prices
If you need to speak to a sales person feel free to call. We are open Monday through Friday 8:30 to 5:00 est. Phone: 1-630-443-3244
Email:
[email protected]
SHIPPING: UPS Ground
Buyer pays
ACTUAL UPS shipping & insurance, and a .00 handling fee
for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS.
We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package's recipient may need to pay these to clear customs.
PAYMENT:
We accept VISA, Master, Discover, American Express and E-Check on PayPal.com
Illinois resident adds 8% sales tax.
RETURNS:
If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.
Any questions regarding our tools, feel free to email us at
[email protected]