VISE BASE "MODEL D60" (6" BASE ONLY)

Description

PLEASE NOTE...WE WILL ONLY SHIP TO THE U.S.A.
ASK ANY QUESTIONS "BEFORE" BUYING AS THERE ARE NO RETURNS.
THIS LISTING REQUIRES AN IMMEDIATE PAYMENT.
WE ARE NOT INTERESTED IN SELLING THIS ITEM FOR LESS MONEY.
THIS LISTING IS FOR THE ONE USED BASE MODEL D60 AS SEEN IN THE PICTURES.
YOU WILL ONLY RECEIVE THE BASE AND NOTHING MORE.
WE ARE NOT POSITIVE,,,,,, BUT THIS MIGHT BE A KURT BASE BECAUSE OF THE D60
CAST INTO THE BOTTOM OF THE CASTING. ON THE LEFT SIDE OF THE BASE THERE ARE SIGNS
OF WHERE
A NAME PLATE USE TO BE, SO WITH OUT THAT WE ARE NOT POSITIVE THAT THIS
IS A KURT BASE.
LISTED BELOW ARE SOME OF THE ITEM DIMENSIONS, OF WHICH SOME ARE SIMILAR TO A KURT.
THE PIVOT HOLE DIAMETER FOR THE SWIVEL BASE MEASURES .993
SLOT WIDTH OF THE MOVING VISE JAW 2.128.
BASE THICKNESS 2.865.
DIAMETER OF TIGHTENING SCREW HOLE MEASURES 1.002.
KEY WAY SLOT WIDTH FOR THE SOLID JAW .376
LOCATING KEY WAYS ON BOTTOM OF CASTING MEASURE .6905 WIDE.
PLEASE NOTE: THESE DIMENSIONS ARE BY USING DIGITAL CALIPERS AND MAY BE OFF .0005 TO .001.
AS SEEN IN THE PICTURES THIS ITEM IS NOT PERFECT,,THERE ARE SIGNS OF USE AND AGE, SUCH
AS DINGS, SCRATCHES,
TARNISH, WEAR, LIGHT PITTING AND LIGHT RUST, DRILL BIT AND OR END MILL
DAMAGE.
AS SEEN IN THE FIRST TWO PICTURES, THERE ARE 6 SMALL AREAS OF DRILL BIT OR END MILL DAMAGE.
PLEASE MOUSE OVER THE PICTURES AS THEY ARE PART OF THE DESCRIPTION, AND TO SEE
IF THIS ITEM WILL MEET YOUR NEEDS AS WE DO NOT ACCEPT RETURNS.
WE HAVE DONE OUR BEST TO DESCRIBE THIS ITEM, PLEASE MAKE SURE THIS ITEM WILL MEET YOUR
NEEDS
AS WE DO NOT ACCEPT RETURNS.